Application: Man Hours 3
This applies to portable emergency pumps and ventilating blowers and
includes electric, LP gas, gasoline, and pneumatic drive motors.
Special Instructions:
1. Review manufacturer's instructions.
Items to Check & Initial Completion:
1. LP gas or gasoline engine.
a.___ Change crankcase oil.
b.___ Clean air and fuel filters; replace when necessary.
c.___ Tune the engine.
d.___ Operate engine and increase RPM until overspeed or governor operates.
Adjust if necessary.
e.___ Check for proper operation of speed controller.
f.___ Check for proper alignment and for unusual or excessive vibration.
g.___ Perform other work prescribed by manufacturer.
2. Electric Motor - PM MOTOREL>1HP-A.
3. Pneumatic Motor - Refer to manufacturer's instructions.
4. Pump - Refer to appropriate pump inspection.
5. Ventilating blower.
a.___ Clean unit.
b.___ Perform required lubrication.
c.___ Check condition of housing, blades, and ventilating tube.
d.___ Check to insure that mounting bolts are secure.
Tools and Materials:
1. Standard Tool kit.
2. Grease
3. Oil
Table of Contents | Next